Id |
Interface |
Description |
i1, i2 |
i2eX, i4, i4x4 |
1 |
Micro USB |
マイクロUSBコネクタ、ボード及びアクセサリへの電源供給、5V |
Use 5V/2A |
Use 5V/2A |
2 |
HDMI |
フルHD HDMI 出力、TVへ接続 |
Supported |
Supported |
3 |
Dual Internal USB |
内部USB、2ポート、0.25Aを越えないこと |
Not supported |
Supported |
4 |
Ethernet |
イーサーネットスイッチやルータへ接続する |
Fast Ethernet |
Gigabit Ethernet |
5 |
CSI Module |
カメラモジュール用CSI
|
Supported |
Supported |
6 |
Dual USB |
USBポート。キーボード、マウス、HDなどを接続する。電源は0.5Aを越えないこと |
Supported |
Supported |
7 |
RTC Backup |
リアルタイマーのバッテリー接続用のコネクタ(安全について参照) |
Not supported |
Supported (See safety section) |
8 |
Infra RED Rx |
Infra Red receiver for remote control support. Running application must support this functionality. |
Not supported |
Supported |
9 |
Reset Button |
ハードウェアリセットボタン |
Supported |
Supported |
10 |
Analog Audio |
|
Mono output PWM tune generator |
Stereo output and MIC input |
11 |
SPDIF Output |
SPDIF 同軸線出力 |
Supported |
Supported |
12 |
Mini PCIe |
Half length (short) mini PCIe モジュールコネクタ |
Not supported |
Supported |
13 |
GPIO Header |
26 pin GPIO Headerデジタル入出力 |
Supported |
Supported |
14 |
LVDS Connector |
LVDS コネクタ、フラット LCDパネルやタッチスクリーン入力付き |
Not supported |
Supported |
15 |
MicroSD |
マイクロSD |
Supported |
Supported |
16 |
mSATA |
SATA high speed interface, mSATA mechanical form factor SSD Drive |
Not supported |
Supported |
17 |
Indication LEDs |
LED表示 |
Supported |
Supported |
|
Descriptions |
TOP VIEW |
|
1 |
MicroSOM - This board holds the i.MX6 main processor, DDR3 memory, Gigabit Ethernet phy, either BCM4329 or BCM4330 WiFi/BT and power management devices. |
2 |
Standard micro USB connector 5V as a DC power |
3 |
HDMI connector |
4 |
Half size mini pci express connector (yellow on the bottom are M2.5 screw ports) |
5 |
Two internal USB header ports (pro version) |
6 |
10/100/1000Mbps Ethernet Connector |
7 |
Powered 2xUSB 2.0 host ports |
8 |
MIPI CSI connector |
9 |
Infrared receiver |
10 |
RTC battery header (powers NXP PCF8523 real time clock). Bottom pin is the '+' |
11 |
Audio in and out connector (connects to SGTL5000 audio codec) |
12 |
Digital coax S/PDIF connector |
13 |
26 pin GPIO header compatible with the Raspberry pi header |
14 |
LVDS display connector |
15 |
Reset button |
16 |
Two LEDs - Red is power and Green is Ethernet link and activity |
BOTTOM VIEW |
|
1 |
Micro SD connector (for OS image and user data) |
2 |
Full size mSata connector |
3 |
Place holder for SIM card connector (not assembled by default). The user can solder JAE SF7W006S1AE1000 connector. |